Kawai Concert Artist CA99 Owner's Manual page 30

Sound Tab Sound Tab
 Split mode
The Split playing mode divides the keyboard into two sections, allowing each section to be played with a different sound. For example,
a bass sound in the left section, and a piano sound in the right section.
1. In the Sub Sound area, tap the [Split] button to enable Split playing mode.
2. In the Sub Sound area, swipe the icons left/right to scroll through the available instrument
types, then tap the desired icon to select it.
3. Tap the
buttons to change the selected sound.
When Split playing mode is selected, the following settings will be displayed.
 Balance
This setting is used to adjust the volume balance between the Main (right section) and Sub
(left section) sounds.
Drag the Balance slider right/left to increase the volume of the Main/Sub sounds.
 Split Point
This setting is used set the point on the keyboard that divides the Main (right section) and
Sub (left section) sounds.
Tap the [–] and [+] buttons to change the Split Point.
 Octave Shift
This setting is used to lower/raise the pitch of the Sub sound in octave steps.
Tap the [–] and [+] buttons to change the Octave Shift value.
The Octave Shift value can be adjusted within the range of 0~+3.
 Lower Pedal
This setting is used to enable/disable pedal functions for the Sub (left section) sound.
When turned off, the pedals will only affect the Main (right section) sound, and not the Sub
(left section) sound.
The pedal functions will always affect the Main (right section) sound.
30
Tap
Tap
Swipe
Tap Tap