Advertisement
IEEE 1284 TO USB PRINTER CABLE BRIDGE
9. If the installation was successful and a printer was
attached to the IEEE 1284 to USB Printer Cable
Bridge in step 1, a test page can now be printed:
• Click on Start/Settings/Printers.
• Right-click on the icon for the printer connected
to the IEEE 1284 to USB Printer Cable Bridge,
then left-click on Properties.
• Choose the Details tab. Select the UC1284USBx
port "Print to the following port." Under "Print
using the following driver," select the driver that
corresponds to the correct printer. Click on the
"Apply" button and then select the "General" tab
of the box.
• To begin the printing process, click on the "Print
Test Page" button.
16
Figure 3-6. Run screen.
Advertisement
