Advertisement
IEEE 1284 TO USB PRINTER CABLE BRIDGE
3. Installation and Operation
Remember that you need Windows 98 or Windows 95
OSR 2.1 to support USB. See the Specifications in
Chapter 1 for more information.
1. Connect the IEEE 1284 to USB Printer Cable
Bridge to a printer or other IEEE Standard 1284
peripheral that is powered on.
2. Plug the USB end of the IEEE 1284 to USB Printer
Cable Bridge into the USB Hub or PC's USB port.
A "New Hardware Found" box will appear stating
that an Unknown Device has been found.
10
Figure 3-1. New Hardware Found box.
Advertisement
