Try The Advanced Features; Useful Functions - JVC LT-52GZ79 Instructions Manual

Try the advanced features

Useful functions

FREEZE : Take snapshots of the screen
Current programme
Still picture
Not available when the SUB-PICTURE is displayed,

or when in PC mode.
You cannot save or export the snapshot.

MULTI-PICTURE : Watch in multi-picture mode
Select the number
of screens
Selecting " " returns to normal viewing mode
 Watch in dual-picture mode
E.g. You can watch TV and video at the same time.
(For wide aspect ratio signals)
Main
Sub
Main
Sub
 Select a channel in 12-screen mode
All registered channels are displayed as still images.
1 select a
channel
Main
2 watch
Only the selected frame
has a moving picture.
12
 Cancel
 Press " " again, or
change the channel
1 select
Not available in PC mode.

2 set
Switch between the

sound sources
Change the channel

(Main)

(Sub)

Move up or down a page
 
Not available for HDMI-1, HDMI-2 or

HDMI-3 input.
ON TIMER : Set a time for the TV to turn itself on
1
"MENU" " " "Features"
 
2
> Timer
On Timer
Sleep Timer
3
>> On Timer
PR 03
On Timer 0 0 : 0 0
4
>> On Timer
PR 01
On Timer 0 0 : 0 0
 Choose the PR (channel) that you want to watch when the TV turns on.
External input and AV position can not be chosen for PR.
 Set the On Timer to your desired period of time by press the number
button. When the On Timer is set to other than 00:00, the On Timer is
activated. You can set the period of time to a maximum of 12 hours in
1 minute intervals.
To off the On Timer, set the On Timer to 00:00 or press
Note : If TV is not in standby mode when On Timer is reach the setting time, then
TV will be change to the specified channel automatically if already in power
on mode
SLEEP TIMER : Set a time for the TV to turn itself off
1
"MENU" " " "Features"
 
"S
1
2 SELECT LEEP
T "
IMER
2 set
 Cancel
Set the time to "0" in step 2

 Remaining time
 You can confirm the remaining time at step 2, after repeating this process.
"Timer"

1 select "On Timer"
1 select PR Channel
2 select timer
1 select
"On Timer"
3 set
(blue)
" " button.
"Timer"

1 select a time
>> Sleep Timer
in minutes
Off
2 set