Subscribe to Our Youtube Channel
Related Manuals for Moimstone MWP1100N
Summary of Contents for Moimstone MWP1100N
- Page 1 Connection Guide for Moimstone MWP1100N to the OfficeServ 7000 and Samsung Communication Manager (SCM) Page 1 of 10...
- Page 2 Party SIP extension/extensions in the OfficeServ 7000 or SCM system. 2. Connect to the handset to the wireless network (SSID) using either method A or B in Part 2 below. 3. Authenticate the handset using the WEB GUI of the Moimstone MWP1100N. Page 2 of 10...
- Page 3 How to configure SIP extensions is not covered in this document. It is assumed the technician is certified on either the OfficeServ 7000, the SCM or both. This part covers what information in these systems is required to successfully register the MWP1100N wireless handset using the SIP extensions already configured for the appropriate Samsung system.
- Page 4 Samsung Communication Manager (SCM) This is where you get the information for Part 3 -Step 4b > Call Setup tab. User ID = Extension Number Authentication Name = Authentication User ID Authentication Password = Authentication Password Page 4 of 10...
- Page 5 Part 2: Connect the Handset to the Wireless LAN using either method A or B below. Quick Wi-Fi Setup (ONLY to be used, if there is ONLY a single access point) [This method does not permit “roaming” amongst multiple WAPs] Otherwise, proceed to next page –...
- Page 6 Regular Wi-Fi Setup This method permits “roaming” amongst multiple Access Points Press the MENU button, then 7 (to go to settings) Press 1 (to go to Wi-Fi setting) Press 1 (for Profile) Press the MENU button then press OK (for Add profile) Enter a Profile name (such as Office) [other profiles can be added at a later time, for other locations (such as home)] Using the Navigation Ring (buttons around the OK button)
- Page 7 Part 3: Configure Handset Authentication Information MWP1100N You must access the WEB GUI of the handset to configure the handset. But first you will need the IP address of the handset. Step 1 Get IP Address of the handset. On the handset press MENU then dial 8 for “System info”, then dial; 3 for Network info.
- Page 8 Step 4b SCM: Enter the User ID, Authentication Name, Password and Domain Name Select the Call Setup tab then enter the User ID, Authentication Password, Authentication Name and Domain Name of the SIP extension as set up in the SCM system. In this example the SCM extension number was used as both the User ID and the Authentication Name.
- Page 9 Part 4: Other Optional Settings to Consider Review the following optional settings as they may or may not apply to customer’s Wi-Fi Network and could affect the operation of the handset. 1. The most important “gotcha” is the Register Expiration timer – which defaults to 60 seconds. This should be changed to 600 seconds in the Call Setup >...
- Page 10 3. Set the Time Zone and enable Daylight Savings Time if applicable, in the Phone Setup > Time tab. 4. Move the g722 CODEC to the top of the list in the Call Setup > Audio tab > Preferred CODEC, to use HD Audio.
Need help?
Do you have a question about the MWP1100N and is the answer not in the manual?
Questions and answers