Features; How To Use - Sharper Image HEATED INSOLES User Manual

FEATURES

• Wireless adjustable temperature control (High, Medium and Low)
• Operates on rechargeable li-polymer batteries (1500mAh battery built into each insole)
• Includes a magnetic USB charge wire and a wireless remote control

HOW TO USE

• Plug the USB charger(Not included) into an outlet and connect with the charge wire.
• Connect both insoles to the charge wire plugs until it is fully charged. The back of the insoles
will illuminate a blue light when fully charged and a red light while charging.
Note: Do not force the plug into the battery. The magnetic port can be easily damaged. Please
make sure it's connected, and the red light is on when charging.
Red Light
• When the blue light illuminates on the insoles, the battery is fully charged.
Note: Fully charge the Heated Insoles battery before using for the first time. Failure to fully
charge the battery prior to the first use may reduce battery life.
• When fully charged, disconnect the insoles from the USB charge wire.
• Before using, check the back of the insole to see if the wireless control is on.
• See image below: Press where the red arrow is pointing to for 3 seconds or until the blue
light on the other side lights up for around 1 second.
• To turn off the wireless function, press where the red arrow is pointing to for 5 seconds or
until the blue light blinks once.
• To turn the heat on press the heat button. Adjusting heat: "H" is high heat (solid blue light).
"M" is medium heat (quick blinking blue light) and "L" is low heat (slow blinking blue light).
Note: The wireless remote control only works within 9.8 ft. from the insoles.
• To turn the insoles off, press the on/off button.
-2-