Subscribe to Our Youtube Channel
Related Manuals for ATD Tools ATD-30332
Summary of Contents for ATD Tools ATD-30332
- Page 1 ATD-30332 30” Tilting Pedestal Fan With Mister Owner’s Manual Features: Specifications:...
-
Page 2: Intended Use
Intended Use: This product is intended for indoor residential, office, industrial, or other commercial applications. Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances. If you have any questions whether your wiring is adequate, consult a qualified electrician. - Page 3 READ & SAVE THESE INSTRUCTIONS WARNING: Shock Hazard This fan is not intended for use in a bathroom, laundry area, near sinks, washing machines swimming pools or other sources of water. Never locate fan where it may fall into a bathtub or other water receptacle.
-
Page 4: Rules For Safe Operation
Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area where it will not be tripped over. Avoid the use of extension cords due to risk of fire. If an extension cord must be used, the cord must be minimum 14 AWG and rated not less then 1875 watts. - Page 5 Assembly Instructions: Fig.1 Fig.2 Fig.3 Fig.4 3. Insert the end of outer pole into the base hole, align the bolt holes on the base with the ones end of Fig.5 Fig.6 Fig.7...
- Page 6 4. 4. Insert the end with bolt holes of the inner pole into the clamping supports. Align the holes on the Fig.8 Fig. 5. Insert the long bolts with washers through the holes on the clamping support and inner pole, then Fig.1 Fig.11 Fig.12...
-
Page 7: Care And Maintenance
Care and Maintenance Cleaning: CAUTION-Before cleaning the fan be sure to disconnect power cord from the plug. Clean the grille surface with a clean damp cloth. Do not use harsh chemical or abrasive cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN WATER. Replace front grille before fan use. Allow fan to dry completely before use. - Page 8 Mis ng kit instruc ons Description Quantity " Installa on 1. Determine the loca ons of each nozzle on the front fan guard. 2. A ach the mis ng system to the front fan guard with the clips to make a mis ng ring as shown above. 3.
-
Page 9: Replacement Parts
REPLACEMENT PARTS ITEM# ORDERING PART# PART DESCRIPTION ITEM# ORDERING PART# PART DESCRIPTION R N G NN R P P NG PP R NG K... -
Page 10: Warranty
WARRANTY 1 YEAR LIMITED WARRANTY THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES...
Need help?
Do you have a question about the ATD-30332 and is the answer not in the manual?
Questions and answers