Sync Options; Wireless Sync - Bowens XMS Series User Manual

10
Quick Start
Q) Stable Colour Temperature Function
32
... When using this function, the colour temperature changes within ± 1 00 K
:J
Cl
over the entire power range: enter MENU C.Fn-F1 and set it as OFF.
Q)
Cl)
which means the colour temperature function is turned on. When
:J
cn
adjusting the power output from high to low in M mode,
2:
><
lndicator will blink (the beeper will alarm for 10 times). Now press the Test
n
Button
to discharge, and the flash can be used as normal.
> l
C<f .:/,
[/••1 ]
1
�,
'
�-�
DFF
Fo •
This function can only supported in M non-high-speed mode.
Q)
32
:J
(9
t:::
El
cn
�
.!:1
:J
0
� Flash Ready
r
, �
f
peed '
s
OFF
1

Sync Options

Wireles.; Sync
2.4GHz Radio Sync
The XMS1000 has a built-in 2.4GHz radio receiver to enable full control
over the flash via a XMTR radio Trigger.
To set up and use a XMTR radio Trigger 2.4GHz:
1. Press the SYNC button until the radio/ symbol is displayed on the LCD screen.
2. To set the radio channel press and hold the CHN button to select the channel options.
3. Turn the rotary encoder to select the desired channel (1-32).
4. Press the Rotary Control Dial to select the required channel.
peed
s
5. To set the radio group press the GRP button to scroll through the available groups (A-E).
11
Q)
32
...
:J
Cl
Q)
Cl)
:J
cn
2:
><
Cl)
C
0
�
0
t)
C
cn
>,