Using The Optional Battery - Easy Touch ET-PT700 Operating Manual

Portable tablet dvd/svcd/vcd/mpeg4/mp3/jpg 7” tft player
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
PRECAUTIONS BEFORE USING THE BATTERY
Please fully charge the battery unit before using it for the first time.
The battery unit becomes hot after recharging, but this is not malfunction.
Please place the battery In a proper environment (15ºC - 25ºC). To avoid placing the battery in a hot or lower temp. environment
Please recharge one time every month if battery is not used In a long time.
The battery unit can be used for about 300 cycles of recharging and operations
Please recharge the battery when the main unit is power off.
Please remove the battery unit from the main unit when it is not used In a long period of time.
INSTALLING THE BATTERY
Install the battery to the battery position (back of the player) according to the direction
Make sure, that the battery is connected to the battery connector
To tighten the screw
The Power LED is light (RED)
REMOVING THE BATTERY
Turn off the player
To Loosem the screw
Take out the battery
RECHARGING THE BATTERY
Connect the AC-DC adapter to the player
When charging, the charge LED indicator is light (Yellow)
The charging time is round 4 to 5 hours (Player is Power off)
or 9 to 10 hours (Player is power on)

USING THE OPTIONAL BATTERY

Advertisement

Table of Contents
loading

Related Products for Easy Touch ET-PT700

Table of Contents