FarmTek 106391 Installation Instructions

Item no.
#106391
WARNING: To avoid electrical shock, turn power supply off before installing or servicing this
unit. This fixture is suitable for outdoor use and should not be used in areas with limited
ventilation or within enclosures with high ambient temperatures.
IMPORTANT SAFETY INFORMATION:
External metal parts of fixture develop high operating temperatures. To avoid possible injury, do not touch
external parts of fixture when it is operating. Turn off power and allow fixture to cool before touching for any
reason.
1. This fixture must be wired in accordance with the National Electrical Code and applicable
local codes and ordinances.
2. Proper grounding is required to ensure personal safety.
3. Make certain that the power source conforms to the requirements of this fixture.
4. Use approved connectors for all electrical connections. Be sure no loose strands of wire are sticking
out from under your wire connectors.
5. All wiring should be done by a qualified electrician.
6. Not intended to be used in potentially dangerous locations such as flammable or explosive
atmospheres.
LAMP INSTALLATION:
Prior to installing the lamp in the fixture , check to be sure the lamp is of proper type and wattage. Screw the
lamp securely into the socket, back the lamp out one to two turns, then screw the lamp back in, making sure it
is secure.
INSTALLATION INSTRUCTIONS
400W Metal Halide Large Wallpack