Advertisement
A1
P-12
Attach 1 Metal Panel (P-12) to the Left Leg Assembly and 1 Metal Panel (P-12) to the Right
44.
Leg Assembly using 4 Phillips Screws (A1) as shown in illustrations #15.
Attach 2 Metal Panels (P-12) to the Wood CPU Assembly using 4 Wood Screws (B1) as
45.
shown in illustrations #15.
46.
Use a hammer to install 4 Plastic Glides (F1) in the bottom of Left Side Panel (P-1) and Right
Side Panel (P-2) as shown in illustration #15.
The Balt product you have purchased is guaranteed against material and workmanship defects. This
guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal
use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common
carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or
implied shall apply. Failure to follow instructions found in Important Information Section of Owner
Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
P-1
F1
B1
B1
P-12
Important
P-2
A1
11
Illustration#15
F1
Advertisement
