Headphones - Philips AZ9211/00 User Manual

POWER SUPPLY/HEADPHONES
Mains adapter
Use only the AY 3170 adapter (4.5 V/300 mA direct
current, positive pole to the centre pin). Any other
product may damage the player.
1 Make sure that the local voltage corresponds to the
mains adapter´s voltage.
2 Connect the mains adapter to the 4.5V DC socket
of the player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
Headphones AY 3677
• Connect the supplied headphones to the LINE OUT/p
socket.
Note: LINE OUT/p can also be used for connecting your
HiFi system (signal lead) or your car radio (cassette
adapter or signal lead). In both cases, the volume
of the player must be set to position 8.
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.
10
(supplied or optionally available)
H O
L D
L I N
E O
U T /
VO L.