Salus SG888ZB Manual page 6

Section 2
STEP 7 . When the SG888ZB Gateway is powered, the LED ring around the multi button will be solid
green . The LED will then turn red . Once an internet connection is available (if plugged
in to a router) the LED will turn green . Using the internet connection, the SG888ZB
Gateway will attempt connection to SALUS Smart Home services . If successful, the LED will
turn blue . If no interent connection is detected, the LED will be red .
Solid Blue
Gateway is connected to the internet and
communicating with SALUS Smart Home services
LED Indications
SG888ZB Gateway Installation & Setup
Solid Green
Gateway is powering up and
attempting to establish connections
Solid Red
Gateway is not connected
to the internet
Flashing Green
Connected to
SALUS Smart Home
services.
Not Connected
to the Internet
Gateway is in identify mode
Flashing Red
Gateway is waiting
for device joining
2-2