Loading And Handling; On-Vehicle Set Up - weedingtech Foamstream L12 User Manual

L12 – User manual – English (EU) – 29/10/2019 - ISSUE 1

14 Loading and handling

Before handling or lifting the L12, ensure that it is fully
disconnected from the:
• Water tank (inlet hose, return hose, and level sensor
cable)
Lance (and the hose is retracted onto reel)
•
The L12 is designed to be lifted from below using a forklift
or similar machinery. It is also possible to lift it from above
using straps or chains passed through the chassis.
CARE SHOULD BE TAKEN WHEN LIFTING THE L12
ONLY USE LIFTING MACHINERY AND
STRAPS/CHAINS CAPABLE OF LIFTING MORE THAN
400KG

14.1 On-vehicle set up

It is recommended that the L12 has its water tanks placed
at its rear.
• The left of the L12 requires access to the water filter
and has the engine exhaust, which cannot be
obstructed.
The right requires access for the input fluids.
•
The front requires access for controls and hose.
•
Before driving, the user should make sure that the unit and
the water tank are appropriately strapped or bolted to the
vehicle.
Figure 9 – Example of strapping of the L12 to a vehicle