L12 – User manual – English (EU) – 29/10/2019 - ISSUE 1
6
Pre-start checks
THESE CHECKS MUST BE COMPLETED BEFORE EACH
START OF THE L12. ANY FAULTS MUST BE RECTIFIED
BEFORE THE L12 IS SWITCHED ON.
The L12 is in good condition and securely attached to
the transport vehicle
The L12 water tank is securely attached to the
transport vehicle
Water tank is full of clean water
Water filter is clean and free from debris
Air intakes (boiler and engine) are clear of debris
The lance, hose reel and hose are securely connected
and free from damage
Lance wear strips are not excessively worn
The water inlet, return hose and water level sensor
are connected
Pipe/hose routes are clear of sharp edges and hot
surfaces
There are no signs of leaks from any pipe or
connection
Petrol tank is full of clean petrol fuel
Diesel tank is full of clean diesel fuel
Diesel filter is clean and free from debris
The Foamstream® concentrate has not been subject
to temperatures below 5°C and frozen or separated
Foamstream® concentrate can is in place and
connected
Foamstream® filter is clean and free from debris
Engine engine oil level is correct
Pump oil level is correct
Engine and boiler exhaust are secure and clear of
debris and obstruction
Water feed valve is connected and in the ON (inline)
position
Air has been bled from water system
DO NOT PUT PETROL INTO THE DIESEL TANK
12