Table of Contents
Advertisement
MFX Multi-Function Monitors
3.2
Tripod or pole-mount operation
MFX Multi-Function Monitors can be mounted on a tripod stand or on a pole above a
subwoofer. Pole cups are located in the recess behind either handle.
Caution!
We recommend that two or more persons lift and place heavier loudspeakers. Single person
!
lift and placement of heavier loudspeakers could cause injury.
Notice!
The pole cups are only designed to support the weight of a single loudspeaker on a single
pole. Do not attempt to stack these loudspeakers using both pole cups.
Mounting a loudspeaker on a tripod stand
Figure 3.3: MFX on a tripod stand (left); Short-medium throw coverage (right)
Caution!
Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the
!
tripod stand to be certain it is capable of supporting the weight of the loudspeaker.
To mount a loudspeaker on a tripod stand, do the following:
1.
–
–
–
2.
3.
Mounting a loudspeaker on a pole
These loudspeakers can also be mounted above a subwoofer, using a standard 35mm (1-3/8")
pole.
Electro-Voice
40°
Place the tripod stand on a level and stable surface.
Fully extend the legs on the tripod stand.
Do not compromise the tripod stand's structural integrity by trying to make the stand
taller.
Do not attempt to mount more than one loudspeaker on a stand designed for a single
loudspeaker.
Lift the loudspeaker using two hands.
Align the pole mount socket located inside the handle cavity with the top of the stand and
slide the loudspeaker onto the pole.
60°
Installation manual
Monitor and pole-mount operation | en
2019-06 | 01 | F.01U.361.835
9
Advertisement
Table of Contents
