HORNER ETG-A100A Installation Manual

1. INTRODUCTION

Advanced LED remote phosphor outdoor lighting provides superior efficacy, reduced glare, and even
lighting output. These lighting products are designed for outdoor lighting in parking lots, walkways, and
roadways. The A100A can be installed either horizontally or vertically by adjusting mounting elbow.
Before you Begin
Read these instructions completely and carefully
Save these instructions for further use.
WARNING
Risk of electrical shock. Disconnect power before servicing or installing product.
WARNING
Risk of injury or damage. Unit will fall if not installed properly. Follow installation instructions
CAUTION
Risk of injury. Wear safety glasses and gloves during installation and servicing.
This luminaire is designed to be used in ambient temperatures of -40C to +45C (-40F to +113F) and be
mounted horizontally with the light source down as shown above. This luminaire should be installed
outdoors and not in areas with limited ventilation or high ambient temperatures. The pipe-mounting
receptacle accepts pipes 2.5" in diameter.
10/28/2013
No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice.
ETG-A100A
LED Remote Phosphor Outdoor Lighting
Installation Guide
LMAN0016-01-EN
ETG-A100A INSTALL SHEET
.
Page 1 of 3