Table of Contents
Advertisement
Minimum clearances
Leave a distance of 300 mm above the appliance.
Observe minimum clearances as follows:
50 mm
100 mm
Ventilation
Never cover or block ventilation openings.
100 mm
Installation and connection
Aligning the appliance
Caution!
To avoid damage to the floor, always move the
■
appliance with the height-adjustable feet screwed
upwards.
The two front height-adjustable feet must always be
■
in contact with the floor to avoid the appliance from
rolling or tipping when the door is opened.
Rollers are located under the appliance for easy
movement and alignment:
Place the appliance vertically on a firm, level floor.
1.
Using a wrench, screw down both of the front height-
2.
adjustable feet so that they touch the floor.
Compensate for floor unevenness with the front
3.
height-adjustable feet.
To align, use a spirit level.
Note:
13
en
7
Advertisement
Table of Contents
