Page 2
Sous réserve de modifications/divergences techniques et d‘erreurs d‘impression. Tous droits réservés à EVVA Sicherheitstechnologie GmbH. Con riserva di modifiche tecniche/differenze ed errori di stampa. Il copyright è di EVVA Sicherheitstechnologie GmbH. Sujeto a modificaciones/divergencias técnicas y errores de impresión. Copyright de EVVA Sicherheitstechnologie GmbH.
Outside thumb turn (conical): 2 Battery in battery compartment – Diverse certifications with various lock manufacturers – e-primo iButton: Ø max. 35 mm, length 31 mm per EN 179 and EN 1125 (optional) 3 Battery clip – e-primo air: Ø max. 35 mm, length 32.5 mm Inside thumb turn (conical): Ø...
Page 6
The components Included in cylinder-package A Available options C – e-primo cylinder – cylinder fixing screw, M5x70 – gasket – cylinder fixing screw, M5x80 – special Allen wrench, ZTOOL1 – office key | OK (Office Key) – lithium battery, CR123A –...
Weak battery Notice: Please note, when the inside thumb turn cover If the battery is weak, the e-primo cylinder will sound a is removed the outside thumb turn can operate the descending warning tone and blink in orange twice before cam even without electronic authorisation.
Page 9
ZTOOL1 Allen wrench. but before closing the door – insert a battery (see “Battery 3 Push the e-primo cylinder by hand, from inside to out- insertion/replacement“), program the e-primo cylinder and Important: Please assign a programming key and a side, through the escutcheon and the mortise lock (loosen test its functionality.
Blocking key | BK (Blocking Key) (available option) The user key serves to lock and unlock the door, it is issued The blocking key sets the e-primo cylinder into a continu- The e-primo cylinder is available in versions for iButton or to the user.
7 seconds. Assigning media 2 Hold the user key you want to train into the e-primo Assigning the programming key cylinder briefly at the reader within 7 seconds. Hold the programming key briefly at the reader.
2 Hold the new programming key briefly at the reader You can create multiple delete keys, one after the other, ration, the e-primo cylinder will indicate whether the lost by repeating steps 3 and 4. user key is still valid (green) or not (red).
The e-primo cylinder can now only be You can reset the e-primo cylinder to its factory settings so reset to factory settings if the programming key is being A higher pitched tone will be emitted, the light ring will Ü...
Page 15
Continuous open operation functionality can be globally If the office function is globally disabled, continuous open disabled or enabled for the e-primo cylinder. It is enabled You can train multiple user keys to the office function, mode cannot be activated with a user key.
A single blocking key can be assigned to multiple e-primo A single emergency opening key can be assigned to mul- cylinders, but only one blocking key per e-primo cylinder tiple e-primo cylinders but, only one emergency opening is possible.
2 Plug the 3-pole cable XRP0PC01 into the emergency power Use of the e-primo cylinder in emergency exit doors or pa- cylinder. device, then carefully plug it into the outside thumb turn.
Page 18
– tighten the fixing screw with ZTOOL1 vances..the e-primo cylinder does not open? The e-primo cylinder also has plastic parts which could – replace discharged battery be broken by rough handling (e.g. hammering) during – perform emergency opening with the emergency installation.
Page 19
M5x70 M5x70 Delete Key | DK M5x80 ZTOOL1 CR 123A Programming Key | PK Blocking Key | BK M5x60 Copy Key | CK Emergency Key | EK XRP0PC01 UK iButton...
Need help?
Do you have a question about the e-primo and is the answer not in the manual?
Questions and answers