Tracer START User Manual page 10

EN
Vehicle DVR
TRACER START
• Manual
• Mount
• USB Cable
• Car Charger
Operate
Two Power options:
A) Use built-in Li-ion battery
DVR can be activated after itNs been placed on the vehicle by press-
ing the Power Switch (9) for 3 seconds and turn off by pressing it
again.
Charging: connect with USB cable or car charger. The indicator
display
red and convert to no light when it is full
B) Connect with Car Charger
DVR will record automatically when the car starts,turn off and save the
last file when the car stops.
Recording
DVR will enter into defaulted recording mode when turn it on,the work
indicator blickers and indicates it is recording.The recording fis saved in
the SD/MMC Card. To stop, press Recording Button (8).
Camera mode
Turn on the DVR and press Mode Button (9) to enter into Camera mode.
To take photo by pressing SNAP Button (8) .
10
User's manual