Chapter6. Important Notes; Packing Requirement For Sending The Pcb Assembly By Post; Short Of Spare Parts While Repairing A Speaker System - Genius SP-HF1250A Service Manual

s
ervice
G
uide
Chapter 6. Important Notes

6.1 Packing requirement for sending the PCB assembly by post

PCB assembly is a kind of sophisticated electronic circuit board. Well packing
Will be required when sending them by post.
*Some sophisticated IC components are mounted on the PCB assembly, hence
it is necessary to pack each PCB assembly with a separate static protecting bag,
in order to avoid static electricity.
*Reliable external packing is also very important when sending the PCB assembly
by post, in that it would avoid unnecessarily lost or damage.

6.2 Short of spare parts while repairing a speaker system

If you are short of spare parts when you have some spesker systems waiting to
be repaired,it would be recommended to take the necessary parts from one
Speaker system,so that you may haye the as many speaker systems
Version: 1.0 Page 14/15
SP-HF1250A