Step 6: Connecting A Vcr Or Cable/Satellite Box; Viewing And Listening To Playback; Using The Vcr For Recording Dvds; Step 7: Connecting Digital Audio Equipment - Philips FWD872/55 User Manual

Connections
Step 6: Connecting a VCR or
cable/satellite box

Viewing and listening to playback

1
Connect the VCR or Cable/Satellite Box to the
TV system as shown.
2
Connect the system's AUX IN jacks to the
AUDIO OUT jacks on the VCR or Cable/
Satellite box.
Before starting operation, press TAPE / AUX
on the remote control to select "AUX" in order
to activate the input source.

Using the VCR for recording DVDs

Some DVDs are copy-protected. You cannot
record or dub protected discs using a VCR.
1
Connect the system's VIDEO jack to the VIDEO
IN jack on the VCR.
2
Connect the system's LINE OUT (R/L) jacks
to the AUDIO IN jacks on the VCR. This will
allow you to make analog stereo (two channel,
right and left) recording.
To view DVD playback while recording
You must connect the system to your TV system
using the S-VIDEO (as shown above) or the
Component (Pr Pb Y) video connection.
14
2
Step 7: Connecting digital audio
equipment
Recording(digital)
Connect the system's DIGITAL OUT jack to the
DIGITAL IN jack on a digital recording device
(DTS-Digital Theater System compatible, with a
Dolby Digital decoder, for example).
Before operation, set the DIGITAL OUTPUT
according to the audio connection.
A