Preparations; Rear Connections; Power; Antenna Connection - Philips FWM996/78 User Manual

Preparations

FM antenna
AC power cord
Rear speaker
(right)

Rear connections

The type plate is located at the rear of the
system.
A

Power

●
If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
●
Before connecting the AC power cords of the
main unit and the subwoofer to the wall outlet,
ensure that all other connections have been
made.
●
To turn on or off the subwoofer, press POWER
switch located on the back of the subwoofer.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
– High voltage! Do not open.You run the
risk of getting an electric shock.
– The machine does not contain any user-
serviceable parts.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
8
B
Front
speaker
(right)
C
A
C
AM antenna
Front
speaker
C
C
A
A
C
Subwoofer
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B
Antennas Connection
Connect the supplied AM loop antenna to the
AM ANTENNA terminal. Adjust the position of
the antenna for optimal reception.
AM Antenna
1
AM
(left)
AC power cord
Rear speaker
(left)
2
Fix the claw
to the slot
3