5530700004 1.General information With the use of electrical devices general safety precautions must be taken to reduce the risk of an electrical shock, ignition of fire or other hazards. Read therefore the following safety and operating instructions carefully and attentively. Keep this document for later rereading carefully. If you pass the equipment on to other persons, you must also this document to ensure a safe use of the equipment.
Page 2
3.Installation Electrostatic sensitive device Do not touch the surface Remove diffuser Wear anti-static gloves of the LED module. Max cable diameter Ø19mm Disconnect Loose screws. Max:3X2.5mm² Remove gear tray Min:3X0.75mm² Install Connector Mounting to wall 2X St 4.2*6 Fix plate with 2 screws install diffuser 5530700004-A2...
Page 3
4. Caution /Warning: When the power cable is damaged it must in order to avoid dangers only be replaced from the manufacturer, his service agency or a similar qualified company. 1.The product must be installed by professional technicians and power supply must be cut off before installation.