Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Solid Signal C41W
Summary of Contents for Solid Signal C41W
- Page 1 Solid Signal’s WHITE PA P E R Advanced C41 Wireless Troublehooting...
-
Page 2: Basic Setup
Sometimes, though, things go kind of sideways. Solid Signal is here to help you with advanced setup and troubleshooting techniques for your wireless client! Basic Setup For most people the basic setup process “just works”... - Page 3 Client Installation Again this takes a lot of waiting. Once your video bridge is set up, connect the C41W to its TV, plug it in and make sure the TV is on (and on the right input.) Note: It’s much easier to have two TVs here, because you will still need access to your Genie DVR.
- Page 4 Resetting the C41W Wireless Genie Mini With the C41W powered up, press and hold the red reset button on the side for AT LEAST 20 seconds. Release it and if you don’t want to do the pairing process right away, unplug it immediately.
- Page 5 Video Bridge can’t find the coax network. Check that the coax cable is connected. Solid Red Poor connection to at least one C41W client. Look for the client with a solid red light. Relocate either the video bridge or the client.
- Page 6 I N D I C A T O R L I G H T S C41W Wireless Genie Mini Click or tap on a graphic to see an animated version, where appropriate. Color Description All Off No power to the client. Connect the power adapter.
- Page 7 SolidSignal.com is your source for DIRECTV equipment, supplies, and support. We have over 10 years’ experience in installing and supporting satellite equipment. Our technical staff is ready to answer all your questions! visit SOLIDSIGNAL.COM for the best selection of equipment and supplies for the high-end installer or do-it-yourselfer! FORUMS.SOLIDSIGNAL.COM...
Need help?
Do you have a question about the C41W and is the answer not in the manual?
Questions and answers