Vehicle-Diagnosed Fault (Dtc - Diagnosed Fault Code), Install Cd; Maintenance And Care; Service; Warranty - AEG OL8000 Operation And Safety Notes

Start-up / Operation / Maintenance and care / Service / Warranty / Disposal
Furthermore, this menu function allows a new
connection to the vehicle to be made.
j 
S elect the menu »MEnu 5.rEScan« by
pressing the button LÖSCHEN / ERASE
j 
T hen press the button LESEN / READ
j 
P ress the button LÖSCHEN / ERASE
back to the main menu.
Vehicle-diagnosed fault (DTC –
 
Diagnosed Fault Code), install CD
The information to the separate error codes can
be taken from this operating manual, from the
chapter „error code list. The most important
1000 error codes are listed there.
The enclosed software-CD covers most of the
error codes. You will receive information on more
recent and some special error codes (mainly „B",
„C" and „U") either via internet search engines
(Search: „OBD 2") or from your specialised dealer.
j
Install the software on your PC or laptop.
Follow the installation instructions of the
software.
System requirements:
Windows 98, Processor min. 133 MHz
Windows ME, Processor min. 150 MHz
Windows 2000, Processor min. 133 MHz
Windows XP, Processor min. 300 MHz
Windows Vista, Processor min. 1 GHz
Windows 7
attEntIOn! The software on the enclosed CD is
only compatible with the above mentioned op-
erating systems.

Maintenance and care

 
The device is maintenance free.
WarnIng!
Before cleaning always separate
the device from the power supply of the vehicle.
To do this, pull out the OBD II connection plug
40 GB
j 
C lean the device and the connection cable
regularly with a dry cloth. Never use solvents
or other aggressive agents. Do not use any
fluids to clean the device.
j 
D o not use hard brushes or metallic objects.
2
. If really dirty, clean the device with a slightly
3
, to go damp cloth. Always completely dry the
2
device after cleaning

Service


WarnIng!
device to qualified technical personnel to
repair. Thus the safety of the device is guaran-
teed and maintained.
WarnIng!
plug or the connecting cable always to quali-
fied technical personnel. Thus the security of
the equipment is guaranteed and maintained.

Warranty


The general guarantee conditions refer to
production and material defects.
If the device is faulty, bring it to your specialist
dealer respectively back to the sales office. In
order to accelerate the warranty and repair work
on the device, you need the following:
- A copy of the receipt (delivery note, bill)
with the acquisition date.
- Reason for the complaint or description of
the error.

Disposal


The packing consists of pollution free materials,
which can dispose of you over the local recy-
cling stations.
.
4
Leave the repair of the
Leave the exchange of the
Do not throw electrical appliances
into the domestic waste!
4