Introduction; Intended Use; Important Product Information; Scope Of Delivery - AEG OL8000 Operation And Safety Notes

Introduction

In this operating manual / this device the following pictogram's are used:
Read operating manual!
Observe warning- and safety
guidelines!
OBD II Diagnostic Device OL 8000
Introduction

Make yourself familiar with all func-
tions before first start-up of the equip-
ment and gain inform you about correct
handling the device. Read for this the following
operating manual carefully. Store this manual
carefully. Pass on all documents also when pass-
ing on the device to third parties.

Intended use


The OBD II diagnostic device is to be used for
the reading and deletion of vehicle error codes
in the on-board computer. This OBD II diagnostic
device OL 8000 is suitable for petrol vehicles
produced from year 2000 upwards and diesel
vehicles from starting from 2003 upwards with a
corresponding OBD II–connector socket. It is
exclusively certified for the private use. All other
use or change to the device is considered as not
intended and bears substantial dangers. The
manufacturer does not take over any liability for
damages arising from unintended use.

Important product information


The designation OBD II stands for »on-board
diagnostic system« of the second generation and
is used for the check of the data memory in
vehicles.
34 GB
Danger to life and danger of
accident for children!
Dispose the packaging
environmentally friendly!
The OBD II-system was developed to check emis-
sions-systems and important electronic- and
engine components.
When the malfunction indicator light „Mal-
function Indicator Light" (MIL) lights up, the
error code can be read using the OBD II-Device.
These diagnosed codes/malfunction messages
(DTC = Diagnosed Trouble Codes) are displayed
on the AEG OBD II diagnostic device. These error
codes are transmitted from the vehicle data
memory to the OBD II -device.
The different diagnosed codes identify a certain
error on the vehicle. The diagnosed code / mal-
function message consists of a 5 digit alphanu-
meric code. The first digit of the error code is a
letter, which identifies the component of the
vehicle. The remaining 4 digits will show a
number, for example P0202.
These error codes help you to identify the main
failure causes by means of the operator manual
or the supplied software-CD. You will find
additional information on the error code in the
chapter „Vehicle diagnosed error„ or in the
Internet under OBD 2.

Scope of delivery


After unpacking immediately check the scope of
delivery. Examine the device and all parts for
damages. Do not take a defective device or part
into operation.
1 OBD II Diagnostic Device OL 8000
1 CD with 8000 error codes