Comcast UEI XHK1-UE Battery Installation

Comcast UEI XHK1-UE Battery Installation

Advertisement

Keypad Battery Installation – UEI XHK1-UE
What You'll Need
UEI XHK1-UE Keypad
Four non-rechargeable AA batteries
Double-sided tape (optional)

How to Install the Batteries

Before proceeding, please be sure that your system is disarmed. Working on devices while the system is armed can
generate false alarms.
Did You Know? You may want to have some double-sided tape on hand if you need to remove your Keypad from the
wall to install a battery. Cut the tape to size and reattach your Keypad if the existing adhesive fails to hold it in place.
Is This Your Keypad? Make sure that your
Keypad looks like the one in the image. If it
does, you have the right document to find out
how to install a battery in your Keypad.
1. Grasp the sides of the keypad and slide it
upwards until it releases from the back
cover.
Take a Look. If batteries are already present,
remove them by gently using your fingertip to
pull one end of the battery up until the battery
is loose. Then, you can it free from the slot.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UEI XHK1-UE and is the answer not in the manual?

Questions and answers

Summary of Contents for Comcast UEI XHK1-UE

  • Page 1 Keypad Battery Installation – UEI XHK1-UE What You’ll Need • UEI XHK1-UE Keypad • Four non-rechargeable AA batteries • Double-sided tape (optional) How to Install the Batteries Before proceeding, please be sure that your system is disarmed. Working on devices while the system is armed can generate false alarms.
  • Page 2 2. The battery compartment contains a diagram of the proper battery position with a symbol indicating which way the positive (+) end of the battery should be facing. Insert four non-rechargeable AA batteries into the battery slots, positioning the positive (+) end of the batteries, as shown in the battery diagram.

Table of Contents