Advertisement
5) The firmware update is complete when the "Upgrade has completed successfully!" message is displayed as
shown in Figure 1d. The disc tray may eject and the unit may power cycle.
6) "Remove the USB Thumb Drive from the Media Player. Momentarily remove AC power from the player by
unplugging the AC power cord. Reconnect the Media Player into the AC power. Firmware updating is complete.
(After completing the software update the USB thumb drive used for this update should be formatted prior
to using with any other application. Use a PC to format the USB drive prior to using the USB drive with any
other application)
2014 Toshiba America Information Systems Inc.
TOSHIBA AMERICA INFORMATION SYSTEMS INC.
http://support.toshiba.com
9740 Irvine Blvd.
Irvine, CA. 92618
Firmware Update (BDX) 2014
2
Advertisement
