Advertisement
The QPS-5000N Audio Power Supply may be used with the QBC-5000N Battery Charger (Network) as well as the QBC-
5000B Battery Charger (Non-network).
QPS-5000N Audio Power Supply for Network System
The QPS-5000N Audio Power Supply mounts into the QBB-5001(R) or the MMX-QBB-5001(R) expansion audio
cabinet. The power supply chassis mounts into the bottom left section of the audio cabinet as shown in Figure 1 below.
On the top portion of the power supply chassis is a battery disconnect relay.
Figure 1: QBB-5001(R)/MMX-QBB-5001(R) Expansion Audio Cabinet Module Placement
SECURE QPS-5000N POWER SUPPLY TO BACKBOX WITH LUGS AND NUTS PROVIDED
Battery
Disconnect
Relay
Red
Black
CONNECTORS FOR MULTIPLE
QMB-5000B MOTHERBOARDS
SLOT #1
CONNECTOR IS
NOT USED
IN
OUT
CONNECTOR FOR QBC-5000N
BATTERY CHARGER
XFORMER
JW1
TS1
Orange-Yellow-Orange
(MUST BE IN CORRECT ORDER)
L N
120 or
240 VAC
Input
12 VDC BATTERY
QPS-5000N
POWER
SUPPLY
Connecting wires are provided with the
QPS-5000N Power Supply Chassis.
Installation Instructions
QBC-5000N
BATTERY
CHARGER
QMB-5000B
Motherboard
SLOTS #2 - #8
CONNECTORS FOR
QAA- STYLE AMPLIFIERS
- BATTERY +
INLINE FUSE 50A
Black
12 VDC BATTERY
LT-1107 Rev 4.1
QPS-5000N
Audio Power Supply
Red
Aug 2015 Page 1 of 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MGC QPS-5000N
Summary of Contents for MGC QPS-5000N
-
Page 1: Installation Instructions
QPS-5000N Audio Power Supply Installation Instructions The QPS-5000N Audio Power Supply may be used with the QBC-5000N Battery Charger (Network) as well as the QBC- 5000B Battery Charger (Non-network). QPS-5000N Audio Power Supply for Network System The QPS-5000N Audio Power Supply mounts into the QBB-5001(R) or the MMX-QBB-5001(R) expansion audio cabinet. - Page 2 Connect QBC and Battery Wires to the QPS-5000N Power Supply Battery Disconnect Relay Two red wires are provided with the power supply to hook up the Battery Disconnect Relay. The other wire to be connected to the Battery Disconnect Relay comes from the QBC-5000N Battery Charger (the red wire soldered to the board or the red/blk cable WX-518) with a lug connector on the end (refer to Figure 1).
- Page 3 QPS-5000N Audio Power Supply for Non-network The QPS-5000N can be used with the QBC-5000B Battery Charger as well as the QBC-5000N Battery Charger. When using either Battery Charger for a non-network audio system, connect as shown in Figure 4 below. Remove the WX-518 connector from the QBC-5000N and discard.
Need help?
Do you have a question about the QPS-5000N and is the answer not in the manual?
Questions and answers