Subscribe to Our Youtube Channel
Related Manuals for Elastix ELX-5000
Summary of Contents for Elastix ELX-5000
- Page 1 Elastix Appliance Assembly Process Guide ELX-5000 PaloSanto Solutions January, 2012 ...
-
Page 2: Individual Parts
INDIVIDUAL PARTS Hardware Brand Model Type Notes: Mainboard Intel S5500BCR Hardware included: - SATA drive data cable Processor Intel Intel Xeon E5502 Up to 2 Processors Memory Kingston / Corsair 240 Pin 4 GB 2x 2GB (Up to 32 GB) DDR3 1333 Hard Drive Seagate / Samsung... -
Page 3: Pre-Installation
ELX-5000 Connect the Power Cord Cable to the PSU connector on the back of the ELX-5000 and then to a nearby outlet Press the power button to turn on the appliance... - Page 4 Place in the optical drive a CD or DVD containing the latest Elastix stable 64 bits version found in http://sourceforge.net/projects/elastix/files/Elastix%20PBX%20Appliance%20Software/ (this guide was written using Elastix 2.2) Reboot the appliance if necessary until the following screen is displayed:...
- Page 5 Select as the type of keyboard: Choose “Create custom layout.”: ...
- Page 6 Hard Disk Drive distribution: Partition Type Size RAID (swap) 4096 MB /boot RAID (ext3) 200 MB RAID (ext3) 450 GB software RAID 4096 MB software RAID 200 MB software RAID 450 GB Leave the remaining space free for posible High Availability implementations in the future Select to configure the Network Interface: ...
- Page 7 Select to activate on boot and to enable IPv4 support: Manually assign the IP address 192.168.1.251 / 24: ...
- Page 8 Enter 192.168.1.1 as the Gateway and Primary DNS addresses: Type elx.palosanto.com as the hostname: ...
- Page 9 Select the time zone according to the city where the appliance is going to be used in: Type palosanto as the password for root: ...
- Page 10 Wait until the package installation finishes: After the automatic reboot, type palosanto as the password for the MySQL root user: ...
- Page 11 Reenter the MySQL root user password just typed: Type palosanto as the password for the admin user: ...
-
Page 12: Post Installation Tests
6fdb48a138023e6fd0aa2700b3adc6e3 Confirm correct access to Elastix’s web UI is possible: Connect the Ethernet port on the ELX-5000 to a free Ethernet port on a computer nearby (using a normal Ethernet straight-thru patch cord) b. Configure that NIC on the computer with IP address 192.168.1.1 (mask 255.255.255.0) From a web browser on the computer go to the URL: https://192.168.1.251... - Page 13 Place and screw both covers to the top of the case Place the warranty seals on all three outside edges on the case’s top cover (the cover with the Elastix logo) Generate and place the label with the Serial Number on the right side of the case (when the power button is...
Need help?
Do you have a question about the ELX-5000 and is the answer not in the manual?
Questions and answers