Slackers Ninja Timer Quick Manual page 2

Step 1. Install Batteries
• Open the back compartment with a small screwdriver
• Insert batteries as shown below
Step 2: Determine where you want to install the timer
Option 1 - set it on a flat surface and go
Option 2 - Purchase a standard 4 x 4 from your local hardware store and create a
stand for the timer (see below for ideas on building the stand)
Option 3 - Attach to the side of a tree
• Determine where you want the timer to hang. Height should be able to be reached
by the shortest contestant
• Use a drill to make a hole slightly larger than the diameter of the screw
• Place screw into the hole and leave apx. 0.5 in (12 mm) of the screw out so you can
hang the timer
• Hang the timer off the screw
b4 Adventure • Denver Colorado 80216 • 1-844-834-4334 • Info@b4Adventure.com
www.b4adventure.com - DC:091019
2