Special Effects Playback; Automatic Operation Features - Philips DVP3345VB/F7 User Manual

32 Special Effects Playback

● Before you begin, press VCR so VCR light appears on the front of the DVD/
VCR.
Forward and Reverse Searching (SP/LP/SLP) / Super High Speed
Searching (LP/SLP)
1
During tape playback, press and release FFW D or REW E.
A fast forward or reverse picture search will begin.
Press FFW D or REW E, then press again. The search speed
will increase. Repeatedly pressing FFW D or REW E will switch
between Regular and High Speed Searching.
2
To return to normal playback, press PLAY B.
Viewing a Still Picture
1
During tape playback, press PAUSE F. A still picture will appear
on the screen.
● To advance the still picture one frame at a time, press PAUSE F
repeatedly.
● To release the still picture and return to playback, press PLAY B.
Viewing a Slow Motion Picture
1
During tape playback, press PAUSE F, then press FFW D.
The tape will play in slow motion.
● To change the playback speed, press FFW D or REW E.
● To return to normal playback, press PLAY B.

Automatic Operation Features

The following tape features are available in VCR mode. Press VCR so VCR light appears on the front of the DVD/VCR, if
necessary.
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on.If the tape's record tab is missing,playback will begin. If a
Timer Recording is set and "
a tape with the record tab intact. If a Timer Recording is set and "
eject the tape if the record tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded or recorded to its end, the tape will rewind to the beginning, stop and eject itself.
This feature does not operate if AUTO REPEAT is ON. Details are on page 30.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in). If a Timer Recording is
set and " " is shown on the display panel, press TIMER SET on the remote control or STOP/EJECT C A on the front
panel to cancel the timer standby mode,and then press STOP/EJECT C A to remove the tape. Remember to insert a tape
and press TIMER SET to reset the Timer Recording.
Automatic Tracking Adjustment
The VCR adjusts tracking automatically to give you the best possible picture quality. With some recordings, however, you
may get a better picture using manual tracking.
Manual Tracking
To manually adjust the tracking during normal playback and Slow Motion Playback of a videotape, press TRACKING K / L.
Tracking will return to Automatic Tracking when you press STOP C or insert a tape. You can also press TRACKING K / L
to remove vertical jitter in a Still picture.
EN - 32
" is flashing in the display panel, the power will not come on automatically when you insert
VCR
INPUT
REW
STOP
DISPLAY SUBTITLE
Helpful Hint
• Slow and still modes will switch to stop
mode after 5 minutes to protect the
DVD/VCR and the tape from damage.
• SP/LP/SLP means this feature will work
with tapes recorded in Standard
Playback, Long Playback or Super Long
Playback. LP/SLP means this feature
will work with tapes recorded in Long
Playback or Super Long Playback. Tape
speed details are on page 58.
" is flashing in the display panel, the DVD/VCR will
SETUP DVD
DISC
MENU
OK
PLAY FFW
PAUSE BACK
ZOOM AUDIO