Mercedes-Benz S-Class 2020 Operator's Manual page 60

58 Occupant safety
Never adjust the seat after installing
#
the child restraint system.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by a Top
Tether. The Top Tether belt facilitates an
additional connection between the child
restraint system attached with LATCH-
type (ISOFIX) and the vehicle.
If necessary, slide the head restraint
#
upwards ( page 111).
/
Fold up cover 2 of Top Tether anchorage
#
3.
Install the LATCH-type (ISOFIX) child restraint
#
system with Top Tether. Comply with the
child restraint system manufacturer's instal‐
lation instructions when doing so.
Guide Top Tether belt
#
restraint 1 between the two head restraint
bars.
Hook Top Tether hook
#
4 into Top Tether anchorage
twisting.
1
Tension Top Tether belt 4. Comply with the
#
child restraint system manufacturer's instal‐
lation instructions when doing so.
Fold down cover 2
#
3.
If necessary, slide head restraint
#
wards ( page 111). Make sure that you do
/
4 under head
5 of Top Tether belt
3 without
of Top Tether anchorage
1 down‐