8. Level 3 Repair
8-4-8-5. Fingerprint Sensor
Fingerprint Sensor does not work
Check the Fingerprint Sensor
connector on Rear Assy
Check the voltage
C9044 =3.3V
Check the Fingerprint Sensor
MISO, MOSI, CLK, CS_N Pins
(SPI is OK?)
Replace the Fingerprint sensor module
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Yes
Yes
Yes
Yes
Yes
END
No
Reconnect or Replace the Sensor FPCB
No
No
Replace SOC9000
Replace SOC9001