Additional Maintenance - abi Elite Ground Drive Setup Manual

Additional Maintenance -

ABI(
Absolute Innovations, Inc.
ABI Elite Ground Drive Spreader Setup Guide
Use the grease zerts to grease the bearings on the
left side as well. These should be greased after 8
hours of continuous use, as needed, or before
periods of storage. Use caution to not over grease
the bearings. 2-3 pumps of grease with a manual
grease pump should be sufficient for greasing the
bearings.
**Wheel bearings on the transport wheels will
need to be repacked by hand twice a year.
There are 2 grease zerts located on the ratcheting
turn knuckle. These should be greased as needed, or
before periods of storage.
) - 855-211-0598
Make sure to wash out the Elite Spreader
after every use to help ensure the life of
your spreader.
- www.abiattachments.com Page 10 of 11