Selecting Tracks; Fast Track Selection; Fast Searching (Audible); Random Track Play (Mix) - Blaupunkt 7 647 482 310 Operating Instructions Manual

CD mode
Notes:
• The CD symbol indicates that a CD is
located in the drive.
A border surrounding the CD symbol
indicates that CD is selected as au-
dio source.
• If the vehicle ignition was switched
off prior to inserting the CD, you
must switch in on fi rst with the but-
ton 2 to start the playback.
If a CD is already inserted in the drive,
u
press the SRC/
ly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.

Selecting tracks

Press one of the arrow buttons 6 to
u
select the next or previous track.
or button 6 once, the
If you press the
player will play the current track again from
the beginning.

Fast track selection

To quickly select tracks backwards or for-
wards,
u
press and hold down one of the
buttons 6 until fast-reverse / fast-for-
ward track selection begins.

Fast searching (audible)

To fast search backwards or forwards,
u
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
40
button > repeated-

Random track play (MIX)

u Press the 5 MIX button <.
"MIX CD" appears briefl y on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.
Cancelling MIX
u Press the 5 MIX button < again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.

Scanning tracks (SCAN)

You can scan (briefl y play) all the tracks on
the CD.
u
Press and hold down the MENU button
: for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling SCAN and continuing
listening to a track
u
To stop scanning, press the MENU but-
ton :.
The currently scanned track will then con-
tinue to be played normally.

Repeating tracks (REPEAT)

If you want to repeat a track,
u press the 4 RPT button <.
"RPT TRCK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.