Download Print this page

Strong S2 Operating Instructions Manual page 6

Advertisement

2.
ÄNDAMÅL OCH FUNKTION/PURPOSE AND FUNCTION
Maskinen är avsedd för uppsugning och avskiljning av torrt och icke
brännbart damm med explosionsgränsvärde > 0.1mg/m
Med startknappen på handtaget startas dammsugaren.
Därvid sugs stoftblandad luft med stor hastighet, via sugslangen. I cyklonen dämpas
hastigheten varvid det grövre stoftet avskiljs, dels genom centrifugalkraft, dels
genom sin egenvikt och dels tack vare avskiljningskonan. Luft och restpartiklar
passerar sedan huvudfiltret och HEPA filtret där avskiljning sker. Aggregatet är
utrustat med filterrensning enl. principen reverserad luftpuls.
Det avskiljda stoftet samlas i cyklonen tills maskinen stängs av, och faller då genom
bottenluckan ner i longopac påsen.
The machine is designed for extraction and separation of dry and non-
combustible dust with an explosion limit> 0.1mg / m3.
You start the machine with the start button on the handle.
When started the machine suction generates a mixture of air and dust particles that
runs through the hose with high air speed. In the tank the air speed slows down and
the big dust particles are separated, partly by centrifugal force, partly by its own
weight and partly by the spray cone. All air passes through the main filter and the
HEPA filter where the smaller particles are separated. The unit is equipped with semi-
automatic filter cleaning with the principle of reverse air pulse.
The separated dust is collected in the tank until the machine is turned off, then it
drops through the bottom flap into the Longopac bag.
3.
DRIFT/OPERATION
Anslut endast utrustningen till avsett eluttag. Se namnskylten
Only connect the equipment to the intended outlet. See
nameplate
Innan användning skall utbildning, information och anvisningar genomföras
i handhavandet av maskinen och det avskiljda dammet.
Anslut maskinen till ett eluttag med spänning enligt maskinens märkskylt.
Med jämna mellanrum bör filtret rensas. Detta måste alltid utföras innan plastpåsen
byts. Detta bör även göras med för arbetsuppgiften lämpligt interval eller när
maskinen tappar orken.
Tillvägagångssätt: Kör maskinen mot stängt rörsystem med maskinens startknapp,
låt maskinen arbeta upp vakuum några sekunder, tryck sedan snabbt ner
utloppsröret från toppen och släpp upp långsamt. Upprepa proceduren 5-10 ggr.
Skulle sugeffekten fortfarande vara dålig, är filterbyte nödvändigt.
VARNING/WARNING!
3
.
6

Advertisement

loading