Advertisement
Quick Links
© Panduit Corp. 2010
(1) Telescoping Duct Assembly
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Vertical Exhaust Duct for 40" Wide N
Extended Cabinet (CVED40VEN**)
**additional characters denote Vertical Exhaust Duct color other than textured black
INSTRUCTIONS CM453
Top Collar Assembly allows for
10" additional height adjustment
CVED40VEN**
Component Guide
(1) Top Collar Assembly
(shipped inside of duct assembly)
Page 1 of 4
-A
ET
CCESS
CVED40VEN**
(fully extended)
TOOL LIST
#2 Phillips Screwdriver
1/2" Socket Wrench
5/16" Socket Wrench
7/16" End Wrench
1/4" Socket Driver
(1) Hardware Kit
(not shown;
includes
foam seals)
Advertisement
Related Manuals for Panduit CVED40VEN Series
Summary of Contents for Panduit CVED40VEN Series
- Page 1 Vertical Exhaust Duct for 40” Wide N CCESS Extended Cabinet (CVED40VEN**) **additional characters denote Vertical Exhaust Duct color other than textured black INSTRUCTIONS CM453 © Panduit Corp. 2010 Top Collar Assembly allows for 10” additional height adjustment CVED40VEN** (fully extended)
- Page 2 (use 5/16” socket wrench) (4) #12-24 Hex Nuts (use 7/16” end wrench) (4) #12-24 Hex Nuts (use 7/16” end wrench) Clamping Features SOME COMPONENTS REMOVED FROM VIEW TO ADD CLARITY (detail view) For Technical Support: www.panduit.com/resources/install_maintain.asp Page 2 of 4...
- Page 3 26 in-lbs. Screws and lockwashers must be removed and re-installed to a different set of threaded holes to allow for an adjustment greater than 2”. (4) #10-32 Phillips Screws and Lockwashers Tighten ALL #10-32 Phillips Screws to 26 in-lbs For Technical Support: www.panduit.com/resources/install_maintain.asp Page 3 of 4...
- Page 4 (use 7/16” socket wrench or end wrench) and Lockwashers Ganging Bracket Ganging Bracket (2) #10-32 Phillips Screws and Lockwashers Ganging Bracket (installed) For Instructions in Local Languages E-mail: and Technical Support: cs@panduit.com Fax: www.panduit.com/resources/install_maintain.asp (708)444-6448 www.panduit.com Page 4 of 4...