ratiotec rapidcount X 300 P Calibration Manual

EN
CALIBRATION GUIDE rapidcount X 300 P
Turn on the device by pressing the ON/OFF
1.
button. The device turns on automatically.
The sensors are adjusted by the software.
2.
In normal working state, press the „CLR"
key 5 times consecutively to enter main-
tenance menu interface.
It shows the following display.
Press the „ADD" or „CLR" key to navigate
3.
the menu. Press the „ADD" key twice to
select the „ SENSOR ADJUST" option.
Afterwards press the „RESET/ENTER" key,
4.
to select the „SENSOR ADJUST" option.
4.1 Calibration of Counting IR sensors
The calibration of the following sensors
can be performed:
4.1 Counting IR sensors
4.2 UV sensors
4.3 CIS white light
4.4 CISIR transmitted light
ratiotec GmbH & Co. KG | Tel.: +49 201 361 490 | Fax: +49 201 361 49 26 | Email: info@ratio-tec.de