Table of Contents
Advertisement
Step 3: Install the Software
Step 3: Install the Software
System Requirements
Requirements
Windows
Operating system
Windows 10 (32 or 64-bit), all versions
Windows 7 SP1 (32 or 64-bit)
Processor speed
1 GHz 32-bit (x86), 1 GHz 64-bit (x64),
no support for Itanium 64
Available memory
1 GB minimum
Available disk
1 GB available hard disk space
space
Display
Minimum of 1024 x 768, 96 or 120 DPI
Temperature
Check upon environment requirement.
range
Might not allow to go as high as ADC module allows.
1
On older computers with minimum RAM, installation can take a long time when installing the .NET
Framework.
Hardware Requirements
A computer running one of the above operating systems and equipped with a USB-C
Thunderbolt-3 port.
The computer or laptop should be configured to have the following installed:
Software installation for Windows users
If a previous version of the Acqiris MD3 Software for Signal Acquisition Cards is installed on
your computer, first uninstall it before installing the new software version.
Acqiris MD3 Software for Signal Acquisition Cards includes the latest Acqiris device driver
AqMD3 (IVI-C, IVI.NET) and product documentation.
1. Download Acqiris MD3 from Acqiris Extranet
10
1
The latest Thunderbolt driver version.
The latest BIOS version.
or directly from
https://acqiris.com/md3
down and select your product). (Creating an account is required), or contact technical
support support@acqiris.com.
Linux
Linux Kernel 2.6 or higher (32 or 64-bit),
Debian-9, CentOS-7, Ubuntu-16.04, and -18.04
As per the minimum requirements of the chosen
distribution
As per the minimum requirements of the chosen
distribution
100 MB
No display required
https://extranet.acqiris.com/
(Creating an account is not required: just scroll
Acqiris SA230E Startup Guide
Advertisement
Table of Contents
