Description Of Device; Type; Thermal Insulation; Specification - ATTACK AK Series Instruction Manual

2. DESCRiPTiON OF DEViCE

The tanks serve for accumulation and subsequent distribution of the heat energy from solid fuel boi-
lers, heat pumps, electric boilers, etc. The accumulation tanks ATTACK AS, HRS, TUVS and SS are acces-
sorized with an extra exchanger for a heat source with separated circuit (e.g. for solar system). The accu-
mulation tanks ATTACK HR, HRS, TUV, TUVS are equipped with a built-in system for D.H.W. preparation.
2.1. TyPES
The AK and AS line of the accumulation tanks with the volume up to 5.000 l and option to install
the electrical heating body.
The HR and HRS line of the accumulation tanks with the volume up to 2.000 l and a built-in D.H.W.
tank and option to install the electrical heating body.
The TUV and TUVS line of the accumulation tanks with the volume up to 2.000 l, a built-in instanta-
neous D.H.W. warming through a copper exchanger and option to install the electrical heating body.
The S and SS is a line of a stratified storage tanks with the volume up to 2.000 l and option to install
the electrical heating body.

2.2. THERMAL iNSULATiON

The accumulation tanks are supplied with 100 mm wide soft insulation made of polyester fibers
with leatherette cover.

2.3. SPECiFiCATiON

Max. operating pressure in the accumulation tank:
Max. operating temperature in the accumulation tank:
Operating pressure in a solar exchanger:
Max. operating pressure in the D.H.W. tank:

3. TECHNiCAL DATA AND DiMENSiONS

Accumulation tanks ATTACK AK, AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 – 7
Accumulation tanks ATTACK HR, HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 – 9
Accumulation tanks ATTACK TUV, TUVS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10 – 11
Stratified accumulation tanks ATTACK S, SS . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12 – 13
ACCUMULATION TANKS
3 bar
95 °C
9 bar
6 bar
5