Advertisement
(Note: This Advanced Wireless Settings page is for testing purpose and it's not intended for end users. Please do not
publish the link of this configuration page to the general public.)
Select Broadcom tab. Toggle MU-MIMO support by checking (enable) or unchecking (disable) both boxes next to "MU-
MIMO Enabled", then click the Apply button. MU-MIMO is enabled by default in EA9300.
Installation of WUSB6100M (for MU-MIMO test only)
Linksys WUSB6100M is a USB wireless adapter that supports MU-MIMO. You only need to install this
wireless adapter if you are going to conduct MU-MIMO test. To install:
1. Insert WUSB6100M wireless adapter into an available USB port on your computer.
2. Watch the computer monitor as the device automatically installs.
3. If the wireless adapter does not install automatically, use the provided CD and run the driver installation file
(also available at linksys.com/support/wusb6100M).
Linksys Wi-Fi Router
Page 8 of 9
Advertisement
