Related Manuals for Linksys EA9300
Summary of Contents for Linksys EA9300
- Page 1 Reviewer Guide Linksys EA9300 Linksys AC4000 MU-MIMO TRI-BAND ROUTER Linksys Wi-Fi Router Page 1 of 9...
-
Page 2: Additional Features
Two USB 3.0 Ports provide flexible network access storage solution and fast data transfer of photos, video, data files across your network ― giving you the ultimate media streaming experience. Linksys Smart Wi-Fi: Access and control your home network from anywhere using a web browser or mobile device ... - Page 3 2. Open a web browser to launch Linksys Smart Wi-Fi router setup instructions. Follow the on-screen instructions to complete your router setup. If you do not see the setup instructions, type 192.168.1.1 in the address bar.
-
Page 4: General Suggestions
4. In Smart Wi-Fi Tools, go to Wireless, turn off Smart Connect and give 2 different network names to 5GHz 5GHz , then click Apply. This is for demonstration of the performance of each individual frequency band in the following tests. General Suggestions Linksys Wi-Fi Router Page 4 of 9... - Page 5 Place EA9300 and Computer #2, the wireless client, about five (5) meters apart from each other Connect Computer #1 with the built-in Gigabit Ethernet port to one of the EA9300’s Ethernet (LAN) ports Connect Computer #2 wirelessly to one of the three wireless networks of EA9300. Computer #2 should be equipped with a stable 3x3 802.11ac wireless adapter, for example, Macbook Pro (“late 2013”...
- Page 6 To demonstrate the benefit of MU-MIMO, first, turn off EA9300’s Smart Connect to make sure all the wireless clients are on the same frequency band. See Step 4 in “To configure the router for the first time” for instructions of turning off Smart Connect.
- Page 7 To enable/disable MU-MIMO support in EA9300: From a computer that is connected to EA9300, log in to the router at 192.168.1.1. Then, visit the following router configuration page (please make sure you have logged in to the router before visiting this configuration page): http://192.168.1.1/ui/dynamic/advanced-wireless.html...
- Page 8 MIMO Enabled”, then click the Apply button. MU-MIMO is enabled by default in EA9300. Installation of WUSB6100M (for MU-MIMO test only) Linksys WUSB6100M is a USB wireless adapter that supports MU-MIMO. You only need to install this wireless adapter if you are going to conduct MU-MIMO test. To install: 1.
- Page 9 Network and Sharing Center > Change adapter settings. Then, right click the built-in wireless adapter and click Disable. ________________________________________________________________________________ If you have any questions please free to contact Karen Sohl: 714 658-7330 karen.sohl@belkin.com Linksys Wi-Fi Router Page 9 of 9...