Autonomous Sequence - Microgate WITTY User Manual

4.4.4 A
UTONOMOUS
The purpose of the test is to turn on a symbol (e.g. an arrow) on the traffic light within a defined period of
time. Generally, only one traffic light is used in order to make the athlete perform specific actions according
to the symbol displayed. If several colours are used, the difficulty can be increased by providing other tasks
(e.g. if the arrow is green, jump in that direction, if it is red jump on the opposite side). The test continues
endlessly until another type of test is chosen or the WittySEM are turned off.
Example 1: an athlete balancing on the Bosu Ball faces a WittySEM, which indicates whether to jump down
from the equipment in the direction shown by the arrow.
Period:
Display Duration
Symbols
Colours
By setting the period to 5 seconds (50 tenths) and the display period to 2 seconds, we will achieve this effect:
2s.
Period 5s
Witty User Manual - EN - v1.5
S
EQUENCE
Insert in tenths of a second the time during which the WittySEM turns
on the chosen symbol
Insert in tenths of a second the time the traffic light stays on in the set
period
It indicates whether to use Arrows, Letters or Numbers
It indicates whether to use only the colour Red, two colours (Red/Green)
or three colours (Red/Green/Blue). In the case of several colours, the
symbols will turn on randomly in one colour or the other.
2s
Period 5s
?
2s
Period 5s
P. 71 / 171