Advertisement
Quick Links
Lumination
LSA Series Installation
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Save these instructions for future use.
RISK OF FIRE OR ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Follow all NEC and local codes.
• Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
• Wear safety glasses and proper aid during installation and
maintenance.
• Install this kit only in the luminaires that has the construction
features and dimensions shown in the photographs and/or
drawings.
• Above ceiling access required.
• While the sensor is designed to withstand Electrostatic Discharge
(ESD), it is always advisable to touch a grounded metal object
before handling the sensor, particularly in an operating fixture.
Specifications
Description Code for Sensor Accessory
T1 (WIT100 Sensor) - Daintree One (120-277 VAC)
TT (WIT100 Sensor) - Daintree EZ Connect (120-277 VAC)
TZ (WIZ100 Sensor) - Daintree Enterprise (120-277 VAC)
TM (WMZ10 Sensor) - Daintree Enterprise Multi-Sensor
(120-277 VAC)
Save These Instructions
These instructions do not purport to cover all details or variations in components nor to provide for every possible contingency to be
met in connection with installation, operation or maintenance. Should further information be desired or should particular problem arise
which are not covered sufficiently for the purchaser's purpose, the matter should be referred to General Electric Company. Current,
powered by GE does not claim liability for any installation not performed according to a this guide or not by a qualified electrician.
CONTACT FACTORY for details and limitations when seeking to add this device to a luminaire being used with an emergency system other
than Battery Backup.
Sensor Accessory
TM
WARNING/AVERTISSEMENT
RISQUES D'INCENDIE OU DE DÉCHARGES ÉLECTRIQUES
• Coupez l'alimentation avant d''inspecter, installer ou déplacer le luminaire.
• Respectez tous les codes NEC et codes locaux.
• Ne pas percer ou altérer les trous d'un boitier contenant filou
composanélectriqu durant l'installation.
• Porter des lunettes de sécurité et les aides appropriéeslors de l'installation
et de l'entretien.
• Installez ce kit uniquement dans les appareils d'éclairagequi a les
caractéristiques de la construction et les dimensions indiquées dans les
photographies et/ou dessins.
• Accès requis au-dessus du plafond.
• Bien que le capteur soit conçu pour résister aux décharges électrostatiques
(ESD), il est toujours conseillé de toucher un objet métallique mis à la terre
avant de manipuler le capteur, en particulier dans une installation en
fonctionnement.
Prepare Electrical Wiring
Installation Guide
Electrical Requirements
•
The LED luminaire must be connected to the mains
supply according to its ratings on the product label.
Grounding Instructions
•
The grounding and bonding of the overall system
shall be done in accordance with National Electric
Code (NEC) Article 600 and local codes .
IND541
Advertisement
Related Manuals for Daintree GE Lumination LSA Series
Summary of Contents for Daintree GE Lumination LSA Series
- Page 1 T1 (WIT100 Sensor) - Daintree One (120-277 VAC) supply according to its ratings on the product label. Grounding Instructions TT (WIT100 Sensor) - Daintree EZ Connect (120-277 VAC) • The grounding and bonding of the overall system shall be done in accordance with National Electric TZ (WIZ100 Sensor) - Daintree Enterprise (120-277 VAC) Code (NEC) Article 600 and local codes .
- Page 2 COMPONENTS SUPPLIED AND IDENTIFICATION WIT100 WIZ100 WMZ10 • T1 - Daintree One Sensor • TZ - Daintree Enterprise • TM - Daintree Enterprise Multi-Sensor Sensor • TT - Daintree EZ Connect • CMP Cable • CMP Cable Sensor • Identification sticker labels •...
- Page 3 CONNECT SUPPLIED ROUTE SENSOR CABLE OUT OF SENSOR CABLE FIXTURE AC Line AC Line Follow appropriate codes for type of grommet to be used. Connect sensor cable to luminaire or accessory box. Route the sensor cable through the knockout hole If the sensor cable is not mounted on the knockout and/or bushing into luminaire and make the plate, remove the knockout plate to access the...
-
Page 4: Components Required
OPTION B - ENCLOSED SENSOR INSTALLATION SENSOR ACCESSORY INSTALLATION WITH GE CURRENT LED FIXTURE (SQ OPTION) COMPONENTS REQUIRED CREATE HOLE IN CEILING Materials to be supplied by Materials ordered separate installer: as an accessory from • Standard electrical enclosure Current: •... -
Page 5: Make Electrical Connections
OPTION C - SENSOR ACCESSORY INSTALLATION STANDALONE UNIT (NO LED FIXTURE). FOLLOW OPTION A OR B FOR NON ENCLOSED OR ENCLOSED INSTALLATION DISCONNECT POWER VERIFY POWER SUPPLY AND SENSOR ARE COMPATIBLE COMPATIBLE POWER SUPPLY (WMZ10 only) OR LCA KIT To verify a compatible power supply, please refer to the Power Supply Compatibility List table on the Multi- Sensor (TM) spec sheet. -
Page 6: Sensor Replacement
SENSOR REPLACEMENT IDENTIFY SENSOR MODEL INSTALLED T1/TT (WIT100) TZ (WIZ100) TM (WMZ10) REMOVE SENSOR FROM CEILING OR LED FIXTURE FOR T1/TT & TM SENSORS Leave cable available for Grab sensor top as Gently pull sensor down Disconnect sensor from replacement sensor. indicated by arrows above until connector is visible. - Page 7 INSTALL REPLACEMENT SENSOR FOR T1/TT & TM SENSORS Connect the sensor to the Orient the cable on the sensor Push sensor in position until Locate sensor cable. sensor cable on fixture. unit so it faces the end of the it can no longer be pushed. fixture to prevent shadowing.
- Page 8 All trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. GE Current a Daintree Company is a business of the General Electric Company. © 2019 GE. www.LED.com...