Digital-Ally FirstVu HD Operation Manual page 11

3.2 VuVault Software
®
VuVault is used to manage FirstVu HD settings as well as activate your device for use
®
within the system.
To take full advantage of all features and enhancements available for your
FirstVu HD be sure to have the latest version of VuVault installed.
Visit http://www.digitalallyinc.com/login.cfm
Before you can configure your device
for use within VuVault, the device
serial number must be added into
the system. Add your device into
VuVault by selecting Admin > Devices >
Advanced > Add Device.
Find the device serial number located
behind the battery in the battery
compartment and type it into the
wizard (do not include the hyphen).
Assign it a name and description.
When done, press Close, then Save.
For more information consult the
"VuVault Administrator Guide" Adding
Devices section.
Go to the Admin > Devices tab. A
separate configuration field for the FirstVu HD will be available once a valid serial
number for the device has been added into the system. These settings will define
how all users will interface with the FirstVu HD. Click on each sub-heading to reveal the
available configuration options. When finished, press Save.
Next, follow the procedure in
configuration settings to the device.
The Default button in the lower left-hand area of the main screen can be used to reset
all configurations for this device to the factory settings.
Table of Contents
Go Back To
to download the most recent software.
3.4 Activating your FirstVu HD
Digital Ally, Inc.
FirstVu HD Operation Guide
to transfer the new
| Device Configuration using VuVault
| 860-00177-00 Rev J
3-2