Advertisement
Quick Links
Complete Installation
1. Fully tighten all remaining bolts.
This completes the installation of your Yamaha Roof Rack. Please enjoy
safely!
Page 4
Installation Instructions
Contents of ACC-RR06, Yamaha G22 Roof Rack:
a
(1 ea.) Roof Rack
b
(2 ea.) Front Mounting Brackets
c
(1 ea.) Driver Side Rear Mounting Bracket
d
(1 ea.) Passenger Side Rear Mounting Bracket
e
(2 ea.) M6 x 25mm Hex Bolts
f
(2 ea.) M6 x 40mm Hex Bolts
g
(2 ea.) M6 x 45mm Hex Bolts
h
(12 ea.) M6 Flat Washers
i
(6 ea.) M6 Lock Nuts
j
(4 ea.) M8 x 60mm Hex Bolts
k
(8 ea.) M8 Flat Washers
l
(4 ea.) M8 Lock Nuts
Caution: Please read through the instructions carefully. Look behind
each drill location BEFORE YOU DRILL. Installer is responsible for
damage (i.e. drilling into a wiring harness, battery, fuel tank etc.).
ACC-RR06
Roof Rack
Yamaha G22
Advertisement
Summary of Contents for Red Hawk ACC-RR06
-
Page 1: Installation Instructions
Yamaha G22 Installation Instructions This completes the installation of your Yamaha Roof Rack. Please enjoy safely! Contents of ACC-RR06, Yamaha G22 Roof Rack: (1 ea.) Roof Rack (2 ea.) Front Mounting Brackets (1 ea.) Driver Side Rear Mounting Bracket (1 ea.) Passenger Side Rear Mounting Bracket (2 ea.) M6 x 25mm Hex Bolts... - Page 2 Driver and Passenger Rear Roof Rack Mounting Brackets Roof Rack Alignment 1. Remove the existing mounting bolts, nuts and washers from both 1. Align the Roof Rack on top of the Mounting Brackets. The Rear Rear Top Struts where they connect to the Top. Mounting Brackets will line up with the tabs on the rear of the Roof 2.