Bubble Magus Curve Elite Series User Manual page 3

Maintenance:
1. Service the collection cup and the neck regularly.
2. Disassemble and clean the venturi and pump every 3 to 6 months.
a. Disassemble, inspect, and clean the impeller to maximize life and performance.
3. A complete skimmer cleaning is recommended every 6 to 12 months.
4. Avoid using harsh cleaning chemicals and soaps. A 50/50 vinegar bath is
recommended.
Further Comments:
1. Do not run the pump dry. Make sure that it is submerged already before operation.
2. After successful installation, bubbles will appear when the pump is active. Otherwise,
restart the system. If the problem persist then contact Sea Side Aquatics for support.
3. New skimmers may require a break-in period of a few days or more.
4. Suggested external water level is 25-27 cm.
5. Each unit has been pre-tested at the factory to ensure that the unit is in working order.
Some traces of water is normal; the unit and all of its components are new.