Advertisement
aSSEMBLY
3
Turn the box right-side up. Place the Lid
on the box, aligning the pre-installed hinge
hardware with the corresponding hardware on the
A
Back Panel
. Connect the hinge hardware using
K
the allen Key
and four M6x20 Bolts
hardware used: 4x M6x20 Bolts
4
Attach the lid-support piston (pre-installed on
interior of Left Wall Panel
head onto the corresponding screw on the inner edge
E
of the Lid
as shown.
All installed bolts, screws, and fasteners may now be
fully tightened.
Contact us for assistance: (866) 985-7877 | www.wtliving.com
E
I
.
4x Washers
C
) by pressing the
3
4
K
I
5
Advertisement
